VladislavOstapov/f103-floppotron
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

First commit

Browse Source
This commit is contained in:
VladislavOstapov
2023-10-12 17:02:10 +03:00
commit f75982feac
107 changed files with 103349 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

179
Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Inc/usbd_cdc.h Normal file
View File

@@ -0,0 +1,179 @@
/**
******************************************************************************
* @file usbd_cdc.h
* @author MCD Application Team
* @brief header file for the usbd_cdc.c file.
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2015 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under Ultimate Liberty license
* SLA0044, the "License"; You may not use this file except in compliance with
* the License. You may obtain a copy of the License at:
* www.st.com/SLA0044
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __USB_CDC_H
#define __USB_CDC_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "usbd_ioreq.h"
/** @addtogroup STM32_USB_DEVICE_LIBRARY
* @{
*/
/** @defgroup usbd_cdc
* @brief This file is the Header file for usbd_cdc.c
* @{
*/
/** @defgroup usbd_cdc_Exported_Defines
* @{
*/
#define CDC_IN_EP 0x81U /* EP1 for data IN */
#define CDC_OUT_EP 0x01U /* EP1 for data OUT */
#define CDC_CMD_EP 0x82U /* EP2 for CDC commands */
#ifndef CDC_HS_BINTERVAL
#define CDC_HS_BINTERVAL 0x10U
#endif /* CDC_HS_BINTERVAL */
#ifndef CDC_FS_BINTERVAL
#define CDC_FS_BINTERVAL 0x10U
#endif /* CDC_FS_BINTERVAL */
/* CDC Endpoints parameters: you can fine tune these values depending on the needed baudrates and performance. */
#define CDC_DATA_HS_MAX_PACKET_SIZE 512U /* Endpoint IN & OUT Packet size */
#define CDC_DATA_FS_MAX_PACKET_SIZE 64U /* Endpoint IN & OUT Packet size */
#define CDC_CMD_PACKET_SIZE 8U /* Control Endpoint Packet size */
#define USB_CDC_CONFIG_DESC_SIZ 67U
#define CDC_DATA_HS_IN_PACKET_SIZE CDC_DATA_HS_MAX_PACKET_SIZE
#define CDC_DATA_HS_OUT_PACKET_SIZE CDC_DATA_HS_MAX_PACKET_SIZE
#define CDC_DATA_FS_IN_PACKET_SIZE CDC_DATA_FS_MAX_PACKET_SIZE
#define CDC_DATA_FS_OUT_PACKET_SIZE CDC_DATA_FS_MAX_PACKET_SIZE
/*---------------------------------------------------------------------*/
/* CDC definitions */
/*---------------------------------------------------------------------*/
#define CDC_SEND_ENCAPSULATED_COMMAND 0x00U
#define CDC_GET_ENCAPSULATED_RESPONSE 0x01U
#define CDC_SET_COMM_FEATURE 0x02U
#define CDC_GET_COMM_FEATURE 0x03U
#define CDC_CLEAR_COMM_FEATURE 0x04U
#define CDC_SET_LINE_CODING 0x20U
#define CDC_GET_LINE_CODING 0x21U
#define CDC_SET_CONTROL_LINE_STATE 0x22U
#define CDC_SEND_BREAK 0x23U
/**
* @}
*/
/** @defgroup USBD_CORE_Exported_TypesDefinitions
* @{
*/
/**
* @}
*/
typedef struct
{
uint32_t bitrate;
uint8_t format;
uint8_t paritytype;
uint8_t datatype;
} USBD_CDC_LineCodingTypeDef;
typedef struct _USBD_CDC_Itf
{
int8_t (* Init)(void);
int8_t (* DeInit)(void);
int8_t (* Control)(uint8_t cmd, uint8_t *pbuf, uint16_t length);
int8_t (* Receive)(uint8_t *Buf, uint32_t *Len);
} USBD_CDC_ItfTypeDef;
typedef struct
{
uint32_t data[CDC_DATA_HS_MAX_PACKET_SIZE / 4U]; /* Force 32bits alignment */
uint8_t CmdOpCode;
uint8_t CmdLength;
uint8_t *RxBuffer;
uint8_t *TxBuffer;
uint32_t RxLength;
uint32_t TxLength;
__IO uint32_t TxState;
__IO uint32_t RxState;
}
USBD_CDC_HandleTypeDef;
/** @defgroup USBD_CORE_Exported_Macros
* @{
*/
/**
* @}
*/
/** @defgroup USBD_CORE_Exported_Variables
* @{
*/
extern USBD_ClassTypeDef USBD_CDC;
#define USBD_CDC_CLASS &USBD_CDC
/**
* @}
*/
/** @defgroup USB_CORE_Exported_Functions
* @{
*/
uint8_t USBD_CDC_RegisterInterface(USBD_HandleTypeDef *pdev,
USBD_CDC_ItfTypeDef *fops);
uint8_t USBD_CDC_SetTxBuffer(USBD_HandleTypeDef *pdev,
uint8_t *pbuff,
uint16_t length);
uint8_t USBD_CDC_SetRxBuffer(USBD_HandleTypeDef *pdev,
uint8_t *pbuff);
uint8_t USBD_CDC_ReceivePacket(USBD_HandleTypeDef *pdev);
uint8_t USBD_CDC_TransmitPacket(USBD_HandleTypeDef *pdev);
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* __USB_CDC_H */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

945
Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.c Normal file
View File

@@ -0,0 +1,945 @@
/**
******************************************************************************
* @file usbd_cdc.c
* @author MCD Application Team
* @brief This file provides the high layer firmware functions to manage the
* following functionalities of the USB CDC Class:
* - Initialization and Configuration of high and low layer
* - Enumeration as CDC Device (and enumeration for each implemented memory interface)
* - OUT/IN data transfer
* - Command IN transfer (class requests management)
* - Error management
*
* @verbatim
*
* ===================================================================
* CDC Class Driver Description
* ===================================================================
* This driver manages the "Universal Serial Bus Class Definitions for Communications Devices
* Revision 1.2 November 16, 2007" and the sub-protocol specification of "Universal Serial Bus
* Communications Class Subclass Specification for PSTN Devices Revision 1.2 February 9, 2007"
* This driver implements the following aspects of the specification:
* - Device descriptor management
* - Configuration descriptor management
* - Enumeration as CDC device with 2 data endpoints (IN and OUT) and 1 command endpoint (IN)
* - Requests management (as described in section 6.2 in specification)
* - Abstract Control Model compliant
* - Union Functional collection (using 1 IN endpoint for control)
* - Data interface class
*
* These aspects may be enriched or modified for a specific user application.
*
* This driver doesn't implement the following aspects of the specification
* (but it is possible to manage these features with some modifications on this driver):
* - Any class-specific aspect relative to communication classes should be managed by user application.
* - All communication classes other than PSTN are not managed
*
* @endverbatim
*
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2015 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under Ultimate Liberty license
* SLA0044, the "License"; You may not use this file except in compliance with
* the License. You may obtain a copy of the License at:
* www.st.com/SLA0044
*
******************************************************************************
*/
/* BSPDependencies
- "stm32xxxxx_{eval}{discovery}{nucleo_144}.c"
- "stm32xxxxx_{eval}{discovery}_io.c"
EndBSPDependencies */
/* Includes ------------------------------------------------------------------*/
#include "usbd_cdc.h"
#include "usbd_ctlreq.h"
/** @addtogroup STM32_USB_DEVICE_LIBRARY
* @{
*/
/** @defgroup USBD_CDC
* @brief usbd core module
* @{
*/
/** @defgroup USBD_CDC_Private_TypesDefinitions
* @{
*/
/**
* @}
*/
/** @defgroup USBD_CDC_Private_Defines
* @{
*/
/**
* @}
*/
/** @defgroup USBD_CDC_Private_Macros
* @{
*/
/**
* @}
*/
/** @defgroup USBD_CDC_Private_FunctionPrototypes
* @{
*/
static uint8_t USBD_CDC_Init(USBD_HandleTypeDef *pdev,
uint8_t cfgidx);
static uint8_t USBD_CDC_DeInit(USBD_HandleTypeDef *pdev,
uint8_t cfgidx);
static uint8_t USBD_CDC_Setup(USBD_HandleTypeDef *pdev,
USBD_SetupReqTypedef *req);
static uint8_t USBD_CDC_DataIn(USBD_HandleTypeDef *pdev,
uint8_t epnum);
static uint8_t USBD_CDC_DataOut(USBD_HandleTypeDef *pdev,
uint8_t epnum);
static uint8_t USBD_CDC_EP0_RxReady(USBD_HandleTypeDef *pdev);
static uint8_t *USBD_CDC_GetFSCfgDesc(uint16_t *length);
static uint8_t *USBD_CDC_GetHSCfgDesc(uint16_t *length);
static uint8_t *USBD_CDC_GetOtherSpeedCfgDesc(uint16_t *length);
static uint8_t *USBD_CDC_GetOtherSpeedCfgDesc(uint16_t *length);
uint8_t *USBD_CDC_GetDeviceQualifierDescriptor(uint16_t *length);
/* USB Standard Device Descriptor */
__ALIGN_BEGIN static uint8_t USBD_CDC_DeviceQualifierDesc[USB_LEN_DEV_QUALIFIER_DESC] __ALIGN_END =
{
USB_LEN_DEV_QUALIFIER_DESC,
USB_DESC_TYPE_DEVICE_QUALIFIER,
0x00,
0x02,
0x00,
0x00,
0x00,
0x40,
0x01,
0x00,
};
/**
* @}
*/
/** @defgroup USBD_CDC_Private_Variables
* @{
*/
/* CDC interface class callbacks structure */
USBD_ClassTypeDef USBD_CDC =
{
USBD_CDC_Init,
USBD_CDC_DeInit,
USBD_CDC_Setup,
NULL, /* EP0_TxSent, */
USBD_CDC_EP0_RxReady,
USBD_CDC_DataIn,
USBD_CDC_DataOut,
NULL,
NULL,
NULL,
USBD_CDC_GetHSCfgDesc,
USBD_CDC_GetFSCfgDesc,
USBD_CDC_GetOtherSpeedCfgDesc,
USBD_CDC_GetDeviceQualifierDescriptor,
};
/* USB CDC device Configuration Descriptor */
__ALIGN_BEGIN uint8_t USBD_CDC_CfgHSDesc[USB_CDC_CONFIG_DESC_SIZ] __ALIGN_END =
{
/*Configuration Descriptor*/
0x09, /* bLength: Configuration Descriptor size */
USB_DESC_TYPE_CONFIGURATION, /* bDescriptorType: Configuration */
USB_CDC_CONFIG_DESC_SIZ, /* wTotalLength:no of returned bytes */
0x00,
0x02, /* bNumInterfaces: 2 interface */
0x01, /* bConfigurationValue: Configuration value */
0x00, /* iConfiguration: Index of string descriptor describing the configuration */
0xC0, /* bmAttributes: self powered */
0x32, /* MaxPower 0 mA */
/*---------------------------------------------------------------------------*/
/*Interface Descriptor */
0x09, /* bLength: Interface Descriptor size */
USB_DESC_TYPE_INTERFACE, /* bDescriptorType: Interface */
/* Interface descriptor type */
0x00, /* bInterfaceNumber: Number of Interface */
0x00, /* bAlternateSetting: Alternate setting */
0x01, /* bNumEndpoints: One endpoints used */
0x02, /* bInterfaceClass: Communication Interface Class */
0x02, /* bInterfaceSubClass: Abstract Control Model */
0x01, /* bInterfaceProtocol: Common AT commands */
0x00, /* iInterface: */
/*Header Functional Descriptor*/
0x05, /* bLength: Endpoint Descriptor size */
0x24, /* bDescriptorType: CS_INTERFACE */
0x00, /* bDescriptorSubtype: Header Func Desc */
0x10, /* bcdCDC: spec release number */
0x01,
/*Call Management Functional Descriptor*/
0x05, /* bFunctionLength */
0x24, /* bDescriptorType: CS_INTERFACE */
0x01, /* bDescriptorSubtype: Call Management Func Desc */
0x00, /* bmCapabilities: D0+D1 */
0x01, /* bDataInterface: 1 */
/*ACM Functional Descriptor*/
0x04, /* bFunctionLength */
0x24, /* bDescriptorType: CS_INTERFACE */
0x02, /* bDescriptorSubtype: Abstract Control Management desc */
0x02, /* bmCapabilities */
/*Union Functional Descriptor*/
0x05, /* bFunctionLength */
0x24, /* bDescriptorType: CS_INTERFACE */
0x06, /* bDescriptorSubtype: Union func desc */
0x00, /* bMasterInterface: Communication class interface */
0x01, /* bSlaveInterface0: Data Class Interface */
/*Endpoint 2 Descriptor*/
0x07, /* bLength: Endpoint Descriptor size */
USB_DESC_TYPE_ENDPOINT, /* bDescriptorType: Endpoint */
CDC_CMD_EP, /* bEndpointAddress */
0x03, /* bmAttributes: Interrupt */
LOBYTE(CDC_CMD_PACKET_SIZE), /* wMaxPacketSize: */
HIBYTE(CDC_CMD_PACKET_SIZE),
CDC_HS_BINTERVAL, /* bInterval: */
/*---------------------------------------------------------------------------*/
/*Data class interface descriptor*/
0x09, /* bLength: Endpoint Descriptor size */
USB_DESC_TYPE_INTERFACE, /* bDescriptorType: */
0x01, /* bInterfaceNumber: Number of Interface */
0x00, /* bAlternateSetting: Alternate setting */
0x02, /* bNumEndpoints: Two endpoints used */
0x0A, /* bInterfaceClass: CDC */
0x00, /* bInterfaceSubClass: */
0x00, /* bInterfaceProtocol: */
0x00, /* iInterface: */
/*Endpoint OUT Descriptor*/
0x07, /* bLength: Endpoint Descriptor size */
USB_DESC_TYPE_ENDPOINT, /* bDescriptorType: Endpoint */
CDC_OUT_EP, /* bEndpointAddress */
0x02, /* bmAttributes: Bulk */
LOBYTE(CDC_DATA_HS_MAX_PACKET_SIZE), /* wMaxPacketSize: */
HIBYTE(CDC_DATA_HS_MAX_PACKET_SIZE),
0x00, /* bInterval: ignore for Bulk transfer */
/*Endpoint IN Descriptor*/
0x07, /* bLength: Endpoint Descriptor size */
USB_DESC_TYPE_ENDPOINT, /* bDescriptorType: Endpoint */
CDC_IN_EP, /* bEndpointAddress */
0x02, /* bmAttributes: Bulk */
LOBYTE(CDC_DATA_HS_MAX_PACKET_SIZE), /* wMaxPacketSize: */
HIBYTE(CDC_DATA_HS_MAX_PACKET_SIZE),
0x00 /* bInterval: ignore for Bulk transfer */
} ;
/* USB CDC device Configuration Descriptor */
__ALIGN_BEGIN uint8_t USBD_CDC_CfgFSDesc[USB_CDC_CONFIG_DESC_SIZ] __ALIGN_END =
{
/*Configuration Descriptor*/
0x09, /* bLength: Configuration Descriptor size */
USB_DESC_TYPE_CONFIGURATION, /* bDescriptorType: Configuration */
USB_CDC_CONFIG_DESC_SIZ, /* wTotalLength:no of returned bytes */
0x00,
0x02, /* bNumInterfaces: 2 interface */
0x01, /* bConfigurationValue: Configuration value */
0x00, /* iConfiguration: Index of string descriptor describing the configuration */
0xC0, /* bmAttributes: self powered */
0x32, /* MaxPower 0 mA */
/*---------------------------------------------------------------------------*/
/*Interface Descriptor */
0x09, /* bLength: Interface Descriptor size */
USB_DESC_TYPE_INTERFACE, /* bDescriptorType: Interface */
/* Interface descriptor type */
0x00, /* bInterfaceNumber: Number of Interface */
0x00, /* bAlternateSetting: Alternate setting */
0x01, /* bNumEndpoints: One endpoints used */
0x02, /* bInterfaceClass: Communication Interface Class */
0x02, /* bInterfaceSubClass: Abstract Control Model */
0x01, /* bInterfaceProtocol: Common AT commands */
0x00, /* iInterface: */
/*Header Functional Descriptor*/
0x05, /* bLength: Endpoint Descriptor size */
0x24, /* bDescriptorType: CS_INTERFACE */
0x00, /* bDescriptorSubtype: Header Func Desc */
0x10, /* bcdCDC: spec release number */
0x01,
/*Call Management Functional Descriptor*/
0x05, /* bFunctionLength */
0x24, /* bDescriptorType: CS_INTERFACE */
0x01, /* bDescriptorSubtype: Call Management Func Desc */
0x00, /* bmCapabilities: D0+D1 */
0x01, /* bDataInterface: 1 */
/*ACM Functional Descriptor*/
0x04, /* bFunctionLength */
0x24, /* bDescriptorType: CS_INTERFACE */
0x02, /* bDescriptorSubtype: Abstract Control Management desc */
0x02, /* bmCapabilities */
/*Union Functional Descriptor*/
0x05, /* bFunctionLength */
0x24, /* bDescriptorType: CS_INTERFACE */
0x06, /* bDescriptorSubtype: Union func desc */
0x00, /* bMasterInterface: Communication class interface */
0x01, /* bSlaveInterface0: Data Class Interface */
/*Endpoint 2 Descriptor*/
0x07, /* bLength: Endpoint Descriptor size */
USB_DESC_TYPE_ENDPOINT, /* bDescriptorType: Endpoint */
CDC_CMD_EP, /* bEndpointAddress */
0x03, /* bmAttributes: Interrupt */
LOBYTE(CDC_CMD_PACKET_SIZE), /* wMaxPacketSize: */
HIBYTE(CDC_CMD_PACKET_SIZE),
CDC_FS_BINTERVAL, /* bInterval: */
/*---------------------------------------------------------------------------*/
/*Data class interface descriptor*/
0x09, /* bLength: Endpoint Descriptor size */
USB_DESC_TYPE_INTERFACE, /* bDescriptorType: */
0x01, /* bInterfaceNumber: Number of Interface */
0x00, /* bAlternateSetting: Alternate setting */
0x02, /* bNumEndpoints: Two endpoints used */
0x0A, /* bInterfaceClass: CDC */
0x00, /* bInterfaceSubClass: */
0x00, /* bInterfaceProtocol: */
0x00, /* iInterface: */
/*Endpoint OUT Descriptor*/
0x07, /* bLength: Endpoint Descriptor size */
USB_DESC_TYPE_ENDPOINT, /* bDescriptorType: Endpoint */
CDC_OUT_EP, /* bEndpointAddress */
0x02, /* bmAttributes: Bulk */
LOBYTE(CDC_DATA_FS_MAX_PACKET_SIZE), /* wMaxPacketSize: */
HIBYTE(CDC_DATA_FS_MAX_PACKET_SIZE),
0x00, /* bInterval: ignore for Bulk transfer */
/*Endpoint IN Descriptor*/
0x07, /* bLength: Endpoint Descriptor size */
USB_DESC_TYPE_ENDPOINT, /* bDescriptorType: Endpoint */
CDC_IN_EP, /* bEndpointAddress */
0x02, /* bmAttributes: Bulk */
LOBYTE(CDC_DATA_FS_MAX_PACKET_SIZE), /* wMaxPacketSize: */
HIBYTE(CDC_DATA_FS_MAX_PACKET_SIZE),
0x00 /* bInterval: ignore for Bulk transfer */
} ;
__ALIGN_BEGIN uint8_t USBD_CDC_OtherSpeedCfgDesc[USB_CDC_CONFIG_DESC_SIZ] __ALIGN_END =
{
0x09, /* bLength: Configuation Descriptor size */
USB_DESC_TYPE_OTHER_SPEED_CONFIGURATION,
USB_CDC_CONFIG_DESC_SIZ,
0x00,
0x02, /* bNumInterfaces: 2 interfaces */
0x01, /* bConfigurationValue: */
0x04, /* iConfiguration: */
0xC0, /* bmAttributes: */
0x32, /* MaxPower 100 mA */
/*Interface Descriptor */
0x09, /* bLength: Interface Descriptor size */
USB_DESC_TYPE_INTERFACE, /* bDescriptorType: Interface */
/* Interface descriptor type */
0x00, /* bInterfaceNumber: Number of Interface */
0x00, /* bAlternateSetting: Alternate setting */
0x01, /* bNumEndpoints: One endpoints used */
0x02, /* bInterfaceClass: Communication Interface Class */
0x02, /* bInterfaceSubClass: Abstract Control Model */
0x01, /* bInterfaceProtocol: Common AT commands */
0x00, /* iInterface: */
/*Header Functional Descriptor*/
0x05, /* bLength: Endpoint Descriptor size */
0x24, /* bDescriptorType: CS_INTERFACE */
0x00, /* bDescriptorSubtype: Header Func Desc */
0x10, /* bcdCDC: spec release number */
0x01,
/*Call Management Functional Descriptor*/
0x05, /* bFunctionLength */
0x24, /* bDescriptorType: CS_INTERFACE */
0x01, /* bDescriptorSubtype: Call Management Func Desc */
0x00, /* bmCapabilities: D0+D1 */
0x01, /* bDataInterface: 1 */
/*ACM Functional Descriptor*/
0x04, /* bFunctionLength */
0x24, /* bDescriptorType: CS_INTERFACE */
0x02, /* bDescriptorSubtype: Abstract Control Management desc */
0x02, /* bmCapabilities */
/*Union Functional Descriptor*/
0x05, /* bFunctionLength */
0x24, /* bDescriptorType: CS_INTERFACE */
0x06, /* bDescriptorSubtype: Union func desc */
0x00, /* bMasterInterface: Communication class interface */
0x01, /* bSlaveInterface0: Data Class Interface */
/*Endpoint 2 Descriptor*/
0x07, /* bLength: Endpoint Descriptor size */
USB_DESC_TYPE_ENDPOINT, /* bDescriptorType: Endpoint */
CDC_CMD_EP, /* bEndpointAddress */
0x03, /* bmAttributes: Interrupt */
LOBYTE(CDC_CMD_PACKET_SIZE), /* wMaxPacketSize: */
HIBYTE(CDC_CMD_PACKET_SIZE),
CDC_FS_BINTERVAL, /* bInterval: */
/*---------------------------------------------------------------------------*/
/*Data class interface descriptor*/
0x09, /* bLength: Endpoint Descriptor size */
USB_DESC_TYPE_INTERFACE, /* bDescriptorType: */
0x01, /* bInterfaceNumber: Number of Interface */
0x00, /* bAlternateSetting: Alternate setting */
0x02, /* bNumEndpoints: Two endpoints used */
0x0A, /* bInterfaceClass: CDC */
0x00, /* bInterfaceSubClass: */
0x00, /* bInterfaceProtocol: */
0x00, /* iInterface: */
/*Endpoint OUT Descriptor*/
0x07, /* bLength: Endpoint Descriptor size */
USB_DESC_TYPE_ENDPOINT, /* bDescriptorType: Endpoint */
CDC_OUT_EP, /* bEndpointAddress */
0x02, /* bmAttributes: Bulk */
0x40, /* wMaxPacketSize: */
0x00,
0x00, /* bInterval: ignore for Bulk transfer */
/*Endpoint IN Descriptor*/
0x07, /* bLength: Endpoint Descriptor size */
USB_DESC_TYPE_ENDPOINT, /* bDescriptorType: Endpoint */
CDC_IN_EP, /* bEndpointAddress */
0x02, /* bmAttributes: Bulk */
0x40, /* wMaxPacketSize: */
0x00,
0x00 /* bInterval */
};
/**
* @}
*/
/** @defgroup USBD_CDC_Private_Functions
* @{
*/
/**
* @brief USBD_CDC_Init
* Initialize the CDC interface
* @param pdev: device instance
* @param cfgidx: Configuration index
* @retval status
*/
static uint8_t USBD_CDC_Init(USBD_HandleTypeDef *pdev, uint8_t cfgidx)
{
uint8_t ret = 0U;
USBD_CDC_HandleTypeDef *hcdc;
if (pdev->dev_speed == USBD_SPEED_HIGH)
{
/* Open EP IN */
USBD_LL_OpenEP(pdev, CDC_IN_EP, USBD_EP_TYPE_BULK,
CDC_DATA_HS_IN_PACKET_SIZE);
pdev->ep_in[CDC_IN_EP & 0xFU].is_used = 1U;
/* Open EP OUT */
USBD_LL_OpenEP(pdev, CDC_OUT_EP, USBD_EP_TYPE_BULK,
CDC_DATA_HS_OUT_PACKET_SIZE);
pdev->ep_out[CDC_OUT_EP & 0xFU].is_used = 1U;
}
else
{
/* Open EP IN */
USBD_LL_OpenEP(pdev, CDC_IN_EP, USBD_EP_TYPE_BULK,
CDC_DATA_FS_IN_PACKET_SIZE);
pdev->ep_in[CDC_IN_EP & 0xFU].is_used = 1U;
/* Open EP OUT */
USBD_LL_OpenEP(pdev, CDC_OUT_EP, USBD_EP_TYPE_BULK,
CDC_DATA_FS_OUT_PACKET_SIZE);
pdev->ep_out[CDC_OUT_EP & 0xFU].is_used = 1U;
}
/* Open Command IN EP */
USBD_LL_OpenEP(pdev, CDC_CMD_EP, USBD_EP_TYPE_INTR, CDC_CMD_PACKET_SIZE);
pdev->ep_in[CDC_CMD_EP & 0xFU].is_used = 1U;
pdev->pClassData = USBD_malloc(sizeof(USBD_CDC_HandleTypeDef));
if (pdev->pClassData == NULL)
{
ret = 1U;
}
else
{
hcdc = (USBD_CDC_HandleTypeDef *) pdev->pClassData;
/* Init physical Interface components */
((USBD_CDC_ItfTypeDef *)pdev->pUserData)->Init();
/* Init Xfer states */
hcdc->TxState = 0U;
hcdc->RxState = 0U;
if (pdev->dev_speed == USBD_SPEED_HIGH)
{
/* Prepare Out endpoint to receive next packet */
USBD_LL_PrepareReceive(pdev, CDC_OUT_EP, hcdc->RxBuffer,
CDC_DATA_HS_OUT_PACKET_SIZE);
}
else
{
/* Prepare Out endpoint to receive next packet */
USBD_LL_PrepareReceive(pdev, CDC_OUT_EP, hcdc->RxBuffer,
CDC_DATA_FS_OUT_PACKET_SIZE);
}
}
return ret;
}
/**
* @brief USBD_CDC_Init
* DeInitialize the CDC layer
* @param pdev: device instance
* @param cfgidx: Configuration index
* @retval status
*/
static uint8_t USBD_CDC_DeInit(USBD_HandleTypeDef *pdev, uint8_t cfgidx)
{
uint8_t ret = 0U;
/* Close EP IN */
USBD_LL_CloseEP(pdev, CDC_IN_EP);
pdev->ep_in[CDC_IN_EP & 0xFU].is_used = 0U;
/* Close EP OUT */
USBD_LL_CloseEP(pdev, CDC_OUT_EP);
pdev->ep_out[CDC_OUT_EP & 0xFU].is_used = 0U;
/* Close Command IN EP */
USBD_LL_CloseEP(pdev, CDC_CMD_EP);
pdev->ep_in[CDC_CMD_EP & 0xFU].is_used = 0U;
/* DeInit physical Interface components */
if (pdev->pClassData != NULL)
{
((USBD_CDC_ItfTypeDef *)pdev->pUserData)->DeInit();
USBD_free(pdev->pClassData);
pdev->pClassData = NULL;
}
return ret;
}
/**
* @brief USBD_CDC_Setup
* Handle the CDC specific requests
* @param pdev: instance
* @param req: usb requests
* @retval status
*/
static uint8_t USBD_CDC_Setup(USBD_HandleTypeDef *pdev,
USBD_SetupReqTypedef *req)
{
USBD_CDC_HandleTypeDef *hcdc = (USBD_CDC_HandleTypeDef *) pdev->pClassData;
uint8_t ifalt = 0U;
uint16_t status_info = 0U;
uint8_t ret = USBD_OK;
switch (req->bmRequest & USB_REQ_TYPE_MASK)
{
case USB_REQ_TYPE_CLASS :
if (req->wLength)
{
if (req->bmRequest & 0x80U)
{
((USBD_CDC_ItfTypeDef *)pdev->pUserData)->Control(req->bRequest,
(uint8_t *)(void *)hcdc->data,
req->wLength);
USBD_CtlSendData(pdev, (uint8_t *)(void *)hcdc->data, req->wLength);
}
else
{
hcdc->CmdOpCode = req->bRequest;
hcdc->CmdLength = (uint8_t)req->wLength;
USBD_CtlPrepareRx(pdev, (uint8_t *)(void *)hcdc->data, req->wLength);
}
}
else
{
((USBD_CDC_ItfTypeDef *)pdev->pUserData)->Control(req->bRequest,
(uint8_t *)(void *)req, 0U);
}
break;
case USB_REQ_TYPE_STANDARD:
switch (req->bRequest)
{
case USB_REQ_GET_STATUS:
if (pdev->dev_state == USBD_STATE_CONFIGURED)
{
USBD_CtlSendData(pdev, (uint8_t *)(void *)&status_info, 2U);
}
else
{
USBD_CtlError(pdev, req);
ret = USBD_FAIL;
}
break;
case USB_REQ_GET_INTERFACE:
if (pdev->dev_state == USBD_STATE_CONFIGURED)
{
USBD_CtlSendData(pdev, &ifalt, 1U);
}
else
{
USBD_CtlError(pdev, req);
ret = USBD_FAIL;
}
break;
case USB_REQ_SET_INTERFACE:
if (pdev->dev_state != USBD_STATE_CONFIGURED)
{
USBD_CtlError(pdev, req);
ret = USBD_FAIL;
}
break;
default:
USBD_CtlError(pdev, req);
ret = USBD_FAIL;
break;
}
break;
default:
USBD_CtlError(pdev, req);
ret = USBD_FAIL;
break;
}
return ret;
}
/**
* @brief USBD_CDC_DataIn
* Data sent on non-control IN endpoint
* @param pdev: device instance
* @param epnum: endpoint number
* @retval status
*/
static uint8_t USBD_CDC_DataIn(USBD_HandleTypeDef *pdev, uint8_t epnum)
{
USBD_CDC_HandleTypeDef *hcdc = (USBD_CDC_HandleTypeDef *)pdev->pClassData;
PCD_HandleTypeDef *hpcd = pdev->pData;
if (pdev->pClassData != NULL)
{
if ((pdev->ep_in[epnum].total_length > 0U) && ((pdev->ep_in[epnum].total_length % hpcd->IN_ep[epnum].maxpacket) == 0U))
{
/* Update the packet total length */
pdev->ep_in[epnum].total_length = 0U;
/* Send ZLP */
USBD_LL_Transmit(pdev, epnum, NULL, 0U);
}
else
{
hcdc->TxState = 0U;
}
return USBD_OK;
}
else
{
return USBD_FAIL;
}
}
/**
* @brief USBD_CDC_DataOut
* Data received on non-control Out endpoint
* @param pdev: device instance
* @param epnum: endpoint number
* @retval status
*/
static uint8_t USBD_CDC_DataOut(USBD_HandleTypeDef *pdev, uint8_t epnum)
{
USBD_CDC_HandleTypeDef *hcdc = (USBD_CDC_HandleTypeDef *) pdev->pClassData;
/* Get the received data length */
hcdc->RxLength = USBD_LL_GetRxDataSize(pdev, epnum);
/* USB data will be immediately processed, this allow next USB traffic being
NAKed till the end of the application Xfer */
if (pdev->pClassData != NULL)
{
((USBD_CDC_ItfTypeDef *)pdev->pUserData)->Receive(hcdc->RxBuffer, &hcdc->RxLength);
return USBD_OK;
}
else
{
return USBD_FAIL;
}
}
/**
* @brief USBD_CDC_EP0_RxReady
* Handle EP0 Rx Ready event
* @param pdev: device instance
* @retval status
*/
static uint8_t USBD_CDC_EP0_RxReady(USBD_HandleTypeDef *pdev)
{
USBD_CDC_HandleTypeDef *hcdc = (USBD_CDC_HandleTypeDef *) pdev->pClassData;
if ((pdev->pUserData != NULL) && (hcdc->CmdOpCode != 0xFFU))
{
((USBD_CDC_ItfTypeDef *)pdev->pUserData)->Control(hcdc->CmdOpCode,
(uint8_t *)(void *)hcdc->data,
(uint16_t)hcdc->CmdLength);
hcdc->CmdOpCode = 0xFFU;
}
return USBD_OK;
}
/**
* @brief USBD_CDC_GetFSCfgDesc
* Return configuration descriptor
* @param speed : current device speed
* @param length : pointer data length
* @retval pointer to descriptor buffer
*/
static uint8_t *USBD_CDC_GetFSCfgDesc(uint16_t *length)
{
*length = sizeof(USBD_CDC_CfgFSDesc);
return USBD_CDC_CfgFSDesc;
}
/**
* @brief USBD_CDC_GetHSCfgDesc
* Return configuration descriptor
* @param speed : current device speed
* @param length : pointer data length
* @retval pointer to descriptor buffer
*/
static uint8_t *USBD_CDC_GetHSCfgDesc(uint16_t *length)
{
*length = sizeof(USBD_CDC_CfgHSDesc);
return USBD_CDC_CfgHSDesc;
}
/**
* @brief USBD_CDC_GetCfgDesc
* Return configuration descriptor
* @param speed : current device speed
* @param length : pointer data length
* @retval pointer to descriptor buffer
*/
static uint8_t *USBD_CDC_GetOtherSpeedCfgDesc(uint16_t *length)
{
*length = sizeof(USBD_CDC_OtherSpeedCfgDesc);
return USBD_CDC_OtherSpeedCfgDesc;
}
/**
* @brief DeviceQualifierDescriptor
* return Device Qualifier descriptor
* @param length : pointer data length
* @retval pointer to descriptor buffer
*/
uint8_t *USBD_CDC_GetDeviceQualifierDescriptor(uint16_t *length)
{
*length = sizeof(USBD_CDC_DeviceQualifierDesc);
return USBD_CDC_DeviceQualifierDesc;
}
/**
* @brief USBD_CDC_RegisterInterface
* @param pdev: device instance
* @param fops: CD Interface callback
* @retval status
*/
uint8_t USBD_CDC_RegisterInterface(USBD_HandleTypeDef *pdev,
USBD_CDC_ItfTypeDef *fops)
{
uint8_t ret = USBD_FAIL;
if (fops != NULL)
{
pdev->pUserData = fops;
ret = USBD_OK;
}
return ret;
}
/**
* @brief USBD_CDC_SetTxBuffer
* @param pdev: device instance
* @param pbuff: Tx Buffer
* @retval status
*/
uint8_t USBD_CDC_SetTxBuffer(USBD_HandleTypeDef *pdev,
uint8_t *pbuff,
uint16_t length)
{
USBD_CDC_HandleTypeDef *hcdc = (USBD_CDC_HandleTypeDef *) pdev->pClassData;
hcdc->TxBuffer = pbuff;
hcdc->TxLength = length;
return USBD_OK;
}
/**
* @brief USBD_CDC_SetRxBuffer
* @param pdev: device instance
* @param pbuff: Rx Buffer
* @retval status
*/
uint8_t USBD_CDC_SetRxBuffer(USBD_HandleTypeDef *pdev,
uint8_t *pbuff)
{
USBD_CDC_HandleTypeDef *hcdc = (USBD_CDC_HandleTypeDef *) pdev->pClassData;
hcdc->RxBuffer = pbuff;
return USBD_OK;
}
/**
* @brief USBD_CDC_TransmitPacket
* Transmit packet on IN endpoint
* @param pdev: device instance
* @retval status
*/
uint8_t USBD_CDC_TransmitPacket(USBD_HandleTypeDef *pdev)
{
USBD_CDC_HandleTypeDef *hcdc = (USBD_CDC_HandleTypeDef *) pdev->pClassData;
if (pdev->pClassData != NULL)
{
if (hcdc->TxState == 0U)
{
/* Tx Transfer in progress */
hcdc->TxState = 1U;
/* Update the packet total length */
pdev->ep_in[CDC_IN_EP & 0xFU].total_length = hcdc->TxLength;
/* Transmit next packet */
USBD_LL_Transmit(pdev, CDC_IN_EP, hcdc->TxBuffer,
(uint16_t)hcdc->TxLength);
return USBD_OK;
}
else
{
return USBD_BUSY;
}
}
else
{
return USBD_FAIL;
}
}
/**
* @brief USBD_CDC_ReceivePacket
* prepare OUT Endpoint for reception
* @param pdev: device instance
* @retval status
*/
uint8_t USBD_CDC_ReceivePacket(USBD_HandleTypeDef *pdev)
{
USBD_CDC_HandleTypeDef *hcdc = (USBD_CDC_HandleTypeDef *) pdev->pClassData;
/* Suspend or Resume USB Out process */
if (pdev->pClassData != NULL)
{
if (pdev->dev_speed == USBD_SPEED_HIGH)
{
/* Prepare Out endpoint to receive next packet */
USBD_LL_PrepareReceive(pdev,
CDC_OUT_EP,
hcdc->RxBuffer,
CDC_DATA_HS_OUT_PACKET_SIZE);
}
else
{
/* Prepare Out endpoint to receive next packet */
USBD_LL_PrepareReceive(pdev,
CDC_OUT_EP,
hcdc->RxBuffer,
CDC_DATA_FS_OUT_PACKET_SIZE);
}
return USBD_OK;
}
else
{
return USBD_FAIL;
}
}
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

161
Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_core.h Normal file
View File

@@ -0,0 +1,161 @@
/**
******************************************************************************
* @file usbd_core.h
* @author MCD Application Team
* @brief Header file for usbd_core.c file
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2015 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under Ultimate Liberty license
* SLA0044, the "License"; You may not use this file except in compliance with
* the License. You may obtain a copy of the License at:
* www.st.com/SLA0044
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __USBD_CORE_H
#define __USBD_CORE_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "usbd_conf.h"
#include "usbd_def.h"
#include "usbd_ioreq.h"
#include "usbd_ctlreq.h"
/** @addtogroup STM32_USB_DEVICE_LIBRARY
* @{
*/
/** @defgroup USBD_CORE
* @brief This file is the Header file for usbd_core.c file
* @{
*/
/** @defgroup USBD_CORE_Exported_Defines
* @{
*/
#ifndef USBD_DEBUG_LEVEL
#define USBD_DEBUG_LEVEL 0U
#endif /* USBD_DEBUG_LEVEL */
/**
* @}
*/
/** @defgroup USBD_CORE_Exported_TypesDefinitions
* @{
*/
/**
* @}
*/
/** @defgroup USBD_CORE_Exported_Macros
* @{
*/
/**
* @}
*/
/** @defgroup USBD_CORE_Exported_Variables
* @{
*/
#define USBD_SOF USBD_LL_SOF
/**
* @}
*/
/** @defgroup USBD_CORE_Exported_FunctionsPrototype
* @{
*/
USBD_StatusTypeDef USBD_Init(USBD_HandleTypeDef *pdev, USBD_DescriptorsTypeDef *pdesc, uint8_t id);
USBD_StatusTypeDef USBD_DeInit(USBD_HandleTypeDef *pdev);
USBD_StatusTypeDef USBD_Start(USBD_HandleTypeDef *pdev);
USBD_StatusTypeDef USBD_Stop(USBD_HandleTypeDef *pdev);
USBD_StatusTypeDef USBD_RegisterClass(USBD_HandleTypeDef *pdev, USBD_ClassTypeDef *pclass);
USBD_StatusTypeDef USBD_RunTestMode(USBD_HandleTypeDef *pdev);
USBD_StatusTypeDef USBD_SetClassConfig(USBD_HandleTypeDef *pdev, uint8_t cfgidx);
USBD_StatusTypeDef USBD_ClrClassConfig(USBD_HandleTypeDef *pdev, uint8_t cfgidx);
USBD_StatusTypeDef USBD_LL_SetupStage(USBD_HandleTypeDef *pdev, uint8_t *psetup);
USBD_StatusTypeDef USBD_LL_DataOutStage(USBD_HandleTypeDef *pdev, uint8_t epnum, uint8_t *pdata);
USBD_StatusTypeDef USBD_LL_DataInStage(USBD_HandleTypeDef *pdev, uint8_t epnum, uint8_t *pdata);
USBD_StatusTypeDef USBD_LL_Reset(USBD_HandleTypeDef *pdev);
USBD_StatusTypeDef USBD_LL_SetSpeed(USBD_HandleTypeDef *pdev, USBD_SpeedTypeDef speed);
USBD_StatusTypeDef USBD_LL_Suspend(USBD_HandleTypeDef *pdev);
USBD_StatusTypeDef USBD_LL_Resume(USBD_HandleTypeDef *pdev);
USBD_StatusTypeDef USBD_LL_SOF(USBD_HandleTypeDef *pdev);
USBD_StatusTypeDef USBD_LL_IsoINIncomplete(USBD_HandleTypeDef *pdev, uint8_t epnum);
USBD_StatusTypeDef USBD_LL_IsoOUTIncomplete(USBD_HandleTypeDef *pdev, uint8_t epnum);
USBD_StatusTypeDef USBD_LL_DevConnected(USBD_HandleTypeDef *pdev);
USBD_StatusTypeDef USBD_LL_DevDisconnected(USBD_HandleTypeDef *pdev);
/* USBD Low Level Driver */
USBD_StatusTypeDef USBD_LL_Init(USBD_HandleTypeDef *pdev);
USBD_StatusTypeDef USBD_LL_DeInit(USBD_HandleTypeDef *pdev);
USBD_StatusTypeDef USBD_LL_Start(USBD_HandleTypeDef *pdev);
USBD_StatusTypeDef USBD_LL_Stop(USBD_HandleTypeDef *pdev);
USBD_StatusTypeDef USBD_LL_OpenEP(USBD_HandleTypeDef *pdev,
uint8_t ep_addr,
uint8_t ep_type,
uint16_t ep_mps);
USBD_StatusTypeDef USBD_LL_CloseEP(USBD_HandleTypeDef *pdev, uint8_t ep_addr);
USBD_StatusTypeDef USBD_LL_FlushEP(USBD_HandleTypeDef *pdev, uint8_t ep_addr);
USBD_StatusTypeDef USBD_LL_StallEP(USBD_HandleTypeDef *pdev, uint8_t ep_addr);
USBD_StatusTypeDef USBD_LL_ClearStallEP(USBD_HandleTypeDef *pdev, uint8_t ep_addr);
uint8_t USBD_LL_IsStallEP(USBD_HandleTypeDef *pdev, uint8_t ep_addr);
USBD_StatusTypeDef USBD_LL_SetUSBAddress(USBD_HandleTypeDef *pdev, uint8_t dev_addr);
USBD_StatusTypeDef USBD_LL_Transmit(USBD_HandleTypeDef *pdev,
uint8_t ep_addr,
uint8_t *pbuf,
uint16_t size);
USBD_StatusTypeDef USBD_LL_PrepareReceive(USBD_HandleTypeDef *pdev,
uint8_t ep_addr,
uint8_t *pbuf,
uint16_t size);
uint32_t USBD_LL_GetRxDataSize(USBD_HandleTypeDef *pdev, uint8_t ep_addr);
void USBD_LL_Delay(uint32_t Delay);
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* __USBD_CORE_H */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

105
Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_ctlreq.h Normal file
View File

@@ -0,0 +1,105 @@
/**
******************************************************************************
* @file usbd_req.h
* @author MCD Application Team
* @brief Header file for the usbd_req.c file
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2015 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under Ultimate Liberty license
* SLA0044, the "License"; You may not use this file except in compliance with
* the License. You may obtain a copy of the License at:
* www.st.com/SLA0044
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __USB_REQUEST_H
#define __USB_REQUEST_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "usbd_def.h"
/** @addtogroup STM32_USB_DEVICE_LIBRARY
* @{
*/
/** @defgroup USBD_REQ
* @brief header file for the usbd_req.c file
* @{
*/
/** @defgroup USBD_REQ_Exported_Defines
* @{
*/
/**
* @}
*/
/** @defgroup USBD_REQ_Exported_Types
* @{
*/
/**
* @}
*/
/** @defgroup USBD_REQ_Exported_Macros
* @{
*/
/**
* @}
*/
/** @defgroup USBD_REQ_Exported_Variables
* @{
*/
/**
* @}
*/
/** @defgroup USBD_REQ_Exported_FunctionsPrototype
* @{
*/
USBD_StatusTypeDef USBD_StdDevReq(USBD_HandleTypeDef *pdev, USBD_SetupReqTypedef *req);
USBD_StatusTypeDef USBD_StdItfReq(USBD_HandleTypeDef *pdev, USBD_SetupReqTypedef *req);
USBD_StatusTypeDef USBD_StdEPReq(USBD_HandleTypeDef *pdev, USBD_SetupReqTypedef *req);
void USBD_CtlError(USBD_HandleTypeDef *pdev, USBD_SetupReqTypedef *req);
void USBD_ParseSetupRequest(USBD_SetupReqTypedef *req, uint8_t *pdata);
void USBD_GetString(uint8_t *desc, uint8_t *unicode, uint16_t *len);
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* __USB_REQUEST_H */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

348
Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_def.h Normal file
View File

@@ -0,0 +1,348 @@
/**
******************************************************************************
* @file usbd_def.h
* @author MCD Application Team
* @brief General defines for the usb device library
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2015 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under Ultimate Liberty license
* SLA0044, the "License"; You may not use this file except in compliance with
* the License. You may obtain a copy of the License at:
* www.st.com/SLA0044
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __USBD_DEF_H
#define __USBD_DEF_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "usbd_conf.h"
/** @addtogroup STM32_USBD_DEVICE_LIBRARY
* @{
*/
/** @defgroup USB_DEF
* @brief general defines for the usb device library file
* @{
*/
/** @defgroup USB_DEF_Exported_Defines
* @{
*/
#ifndef NULL
#define NULL 0U
#endif /* NULL */
#ifndef USBD_MAX_NUM_INTERFACES
#define USBD_MAX_NUM_INTERFACES 1U
#endif /* USBD_MAX_NUM_CONFIGURATION */
#ifndef USBD_MAX_NUM_CONFIGURATION
#define USBD_MAX_NUM_CONFIGURATION 1U
#endif /* USBD_MAX_NUM_CONFIGURATION */
#ifndef USBD_LPM_ENABLED
#define USBD_LPM_ENABLED 0U
#endif /* USBD_LPM_ENABLED */
#ifndef USBD_SELF_POWERED
#define USBD_SELF_POWERED 1U
#endif /*USBD_SELF_POWERED */
#ifndef USBD_SUPPORT_USER_STRING_DESC
#define USBD_SUPPORT_USER_STRING_DESC 0U
#endif /* USBD_SUPPORT_USER_STRING_DESC */
#define USB_LEN_DEV_QUALIFIER_DESC 0x0AU
#define USB_LEN_DEV_DESC 0x12U
#define USB_LEN_CFG_DESC 0x09U
#define USB_LEN_IF_DESC 0x09U
#define USB_LEN_EP_DESC 0x07U
#define USB_LEN_OTG_DESC 0x03U
#define USB_LEN_LANGID_STR_DESC 0x04U
#define USB_LEN_OTHER_SPEED_DESC_SIZ 0x09U
#define USBD_IDX_LANGID_STR 0x00U
#define USBD_IDX_MFC_STR 0x01U
#define USBD_IDX_PRODUCT_STR 0x02U
#define USBD_IDX_SERIAL_STR 0x03U
#define USBD_IDX_CONFIG_STR 0x04U
#define USBD_IDX_INTERFACE_STR 0x05U
#define USB_REQ_TYPE_STANDARD 0x00U
#define USB_REQ_TYPE_CLASS 0x20U
#define USB_REQ_TYPE_VENDOR 0x40U
#define USB_REQ_TYPE_MASK 0x60U
#define USB_REQ_RECIPIENT_DEVICE 0x00U
#define USB_REQ_RECIPIENT_INTERFACE 0x01U
#define USB_REQ_RECIPIENT_ENDPOINT 0x02U
#define USB_REQ_RECIPIENT_MASK 0x03U
#define USB_REQ_GET_STATUS 0x00U
#define USB_REQ_CLEAR_FEATURE 0x01U
#define USB_REQ_SET_FEATURE 0x03U
#define USB_REQ_SET_ADDRESS 0x05U
#define USB_REQ_GET_DESCRIPTOR 0x06U
#define USB_REQ_SET_DESCRIPTOR 0x07U
#define USB_REQ_GET_CONFIGURATION 0x08U
#define USB_REQ_SET_CONFIGURATION 0x09U
#define USB_REQ_GET_INTERFACE 0x0AU
#define USB_REQ_SET_INTERFACE 0x0BU
#define USB_REQ_SYNCH_FRAME 0x0CU
#define USB_DESC_TYPE_DEVICE 0x01U
#define USB_DESC_TYPE_CONFIGURATION 0x02U
#define USB_DESC_TYPE_STRING 0x03U
#define USB_DESC_TYPE_INTERFACE 0x04U
#define USB_DESC_TYPE_ENDPOINT 0x05U
#define USB_DESC_TYPE_DEVICE_QUALIFIER 0x06U
#define USB_DESC_TYPE_OTHER_SPEED_CONFIGURATION 0x07U
#define USB_DESC_TYPE_BOS 0x0FU
#define USB_CONFIG_REMOTE_WAKEUP 0x02U
#define USB_CONFIG_SELF_POWERED 0x01U
#define USB_FEATURE_EP_HALT 0x00U
#define USB_FEATURE_REMOTE_WAKEUP 0x01U
#define USB_FEATURE_TEST_MODE 0x02U
#define USB_DEVICE_CAPABITY_TYPE 0x10U
#define USB_HS_MAX_PACKET_SIZE 512U
#define USB_FS_MAX_PACKET_SIZE 64U
#define USB_MAX_EP0_SIZE 64U
/* Device Status */
#define USBD_STATE_DEFAULT 0x01U
#define USBD_STATE_ADDRESSED 0x02U
#define USBD_STATE_CONFIGURED 0x03U
#define USBD_STATE_SUSPENDED 0x04U
/* EP0 State */
#define USBD_EP0_IDLE 0x00U
#define USBD_EP0_SETUP 0x01U
#define USBD_EP0_DATA_IN 0x02U
#define USBD_EP0_DATA_OUT 0x03U
#define USBD_EP0_STATUS_IN 0x04U
#define USBD_EP0_STATUS_OUT 0x05U
#define USBD_EP0_STALL 0x06U
#define USBD_EP_TYPE_CTRL 0x00U
#define USBD_EP_TYPE_ISOC 0x01U
#define USBD_EP_TYPE_BULK 0x02U
#define USBD_EP_TYPE_INTR 0x03U
/**
* @}
*/
/** @defgroup USBD_DEF_Exported_TypesDefinitions
* @{
*/
typedef struct usb_setup_req
{
uint8_t bmRequest;
uint8_t bRequest;
uint16_t wValue;
uint16_t wIndex;
uint16_t wLength;
} USBD_SetupReqTypedef;
struct _USBD_HandleTypeDef;
typedef struct _Device_cb
{
uint8_t (*Init)(struct _USBD_HandleTypeDef *pdev, uint8_t cfgidx);
uint8_t (*DeInit)(struct _USBD_HandleTypeDef *pdev, uint8_t cfgidx);
/* Control Endpoints*/
uint8_t (*Setup)(struct _USBD_HandleTypeDef *pdev, USBD_SetupReqTypedef *req);
uint8_t (*EP0_TxSent)(struct _USBD_HandleTypeDef *pdev);
uint8_t (*EP0_RxReady)(struct _USBD_HandleTypeDef *pdev);
/* Class Specific Endpoints*/
uint8_t (*DataIn)(struct _USBD_HandleTypeDef *pdev, uint8_t epnum);
uint8_t (*DataOut)(struct _USBD_HandleTypeDef *pdev, uint8_t epnum);
uint8_t (*SOF)(struct _USBD_HandleTypeDef *pdev);
uint8_t (*IsoINIncomplete)(struct _USBD_HandleTypeDef *pdev, uint8_t epnum);
uint8_t (*IsoOUTIncomplete)(struct _USBD_HandleTypeDef *pdev, uint8_t epnum);
uint8_t *(*GetHSConfigDescriptor)(uint16_t *length);
uint8_t *(*GetFSConfigDescriptor)(uint16_t *length);
uint8_t *(*GetOtherSpeedConfigDescriptor)(uint16_t *length);
uint8_t *(*GetDeviceQualifierDescriptor)(uint16_t *length);
#if (USBD_SUPPORT_USER_STRING_DESC == 1U)
uint8_t *(*GetUsrStrDescriptor)(struct _USBD_HandleTypeDef *pdev, uint8_t index, uint16_t *length);
#endif
} USBD_ClassTypeDef;
/* Following USB Device Speed */
typedef enum
{
USBD_SPEED_HIGH = 0U,
USBD_SPEED_FULL = 1U,
USBD_SPEED_LOW = 2U,
} USBD_SpeedTypeDef;
/* Following USB Device status */
typedef enum
{
USBD_OK = 0U,
USBD_BUSY,
USBD_FAIL,
} USBD_StatusTypeDef;
/* USB Device descriptors structure */
typedef struct
{
uint8_t *(*GetDeviceDescriptor)(USBD_SpeedTypeDef speed, uint16_t *length);
uint8_t *(*GetLangIDStrDescriptor)(USBD_SpeedTypeDef speed, uint16_t *length);
uint8_t *(*GetManufacturerStrDescriptor)(USBD_SpeedTypeDef speed, uint16_t *length);
uint8_t *(*GetProductStrDescriptor)(USBD_SpeedTypeDef speed, uint16_t *length);
uint8_t *(*GetSerialStrDescriptor)(USBD_SpeedTypeDef speed, uint16_t *length);
uint8_t *(*GetConfigurationStrDescriptor)(USBD_SpeedTypeDef speed, uint16_t *length);
uint8_t *(*GetInterfaceStrDescriptor)(USBD_SpeedTypeDef speed, uint16_t *length);
#if (USBD_LPM_ENABLED == 1U)
uint8_t *(*GetBOSDescriptor)(USBD_SpeedTypeDef speed, uint16_t *length);
#endif
} USBD_DescriptorsTypeDef;
/* USB Device handle structure */
typedef struct
{
uint32_t status;
uint32_t is_used;
uint32_t total_length;
uint32_t rem_length;
uint32_t maxpacket;
} USBD_EndpointTypeDef;
/* USB Device handle structure */
typedef struct _USBD_HandleTypeDef
{
uint8_t id;
uint32_t dev_config;
uint32_t dev_default_config;
uint32_t dev_config_status;
USBD_SpeedTypeDef dev_speed;
USBD_EndpointTypeDef ep_in[16];
USBD_EndpointTypeDef ep_out[16];
uint32_t ep0_state;
uint32_t ep0_data_len;
uint8_t dev_state;
uint8_t dev_old_state;
uint8_t dev_address;
uint8_t dev_connection_status;
uint8_t dev_test_mode;
uint32_t dev_remote_wakeup;
USBD_SetupReqTypedef request;
USBD_DescriptorsTypeDef *pDesc;
USBD_ClassTypeDef *pClass;
void *pClassData;
void *pUserData;
void *pData;
} USBD_HandleTypeDef;
/**
* @}
*/
/** @defgroup USBD_DEF_Exported_Macros
* @{
*/
#define SWAPBYTE(addr) (((uint16_t)(*((uint8_t *)(addr)))) + \
(((uint16_t)(*(((uint8_t *)(addr)) + 1U))) << 8U))
#define LOBYTE(x) ((uint8_t)((x) & 0x00FFU))
#define HIBYTE(x) ((uint8_t)(((x) & 0xFF00U) >> 8U))
#define MIN(a, b) (((a) < (b)) ? (a) : (b))
#define MAX(a, b) (((a) > (b)) ? (a) : (b))
#if defined ( __GNUC__ )
#ifndef __weak
#define __weak __attribute__((weak))
#endif /* __weak */
#ifndef __packed
#define __packed __attribute__((__packed__))
#endif /* __packed */
#endif /* __GNUC__ */
/* In HS mode and when the DMA is used, all variables and data structures dealing
with the DMA during the transaction process should be 4-bytes aligned */
#if defined ( __GNUC__ ) && !defined (__CC_ARM) /* GNU Compiler */
#ifndef __ALIGN_END
#define __ALIGN_END __attribute__ ((aligned (4U)))
#endif /* __ALIGN_END */
#ifndef __ALIGN_BEGIN
#define __ALIGN_BEGIN
#endif /* __ALIGN_BEGIN */
#else
#ifndef __ALIGN_END
#define __ALIGN_END
#endif /* __ALIGN_END */
#ifndef __ALIGN_BEGIN
#if defined (__CC_ARM) /* ARM Compiler */
#define __ALIGN_BEGIN __align(4U)
#elif defined (__ICCARM__) /* IAR Compiler */
#define __ALIGN_BEGIN
#endif /* __CC_ARM */
#endif /* __ALIGN_BEGIN */
#endif /* __GNUC__ */
/**
* @}
*/
/** @defgroup USBD_DEF_Exported_Variables
* @{
*/
/**
* @}
*/
/** @defgroup USBD_DEF_Exported_FunctionsPrototype
* @{
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* __USBD_DEF_H */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

119
Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_ioreq.h Normal file
View File

@@ -0,0 +1,119 @@
/**
******************************************************************************
* @file usbd_ioreq.h
* @author MCD Application Team
* @brief Header file for the usbd_ioreq.c file
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2015 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under Ultimate Liberty license
* SLA0044, the "License"; You may not use this file except in compliance with
* the License. You may obtain a copy of the License at:
* www.st.com/SLA0044
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __USBD_IOREQ_H
#define __USBD_IOREQ_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "usbd_def.h"
#include "usbd_core.h"
/** @addtogroup STM32_USB_DEVICE_LIBRARY
* @{
*/
/** @defgroup USBD_IOREQ
* @brief header file for the usbd_ioreq.c file
* @{
*/
/** @defgroup USBD_IOREQ_Exported_Defines
* @{
*/
/**
* @}
*/
/** @defgroup USBD_IOREQ_Exported_Types
* @{
*/
/**
* @}
*/
/** @defgroup USBD_IOREQ_Exported_Macros
* @{
*/
/**
* @}
*/
/** @defgroup USBD_IOREQ_Exported_Variables
* @{
*/
/**
* @}
*/
/** @defgroup USBD_IOREQ_Exported_FunctionsPrototype
* @{
*/
USBD_StatusTypeDef USBD_CtlSendData(USBD_HandleTypeDef *pdev,
uint8_t *pbuf,
uint16_t len);
USBD_StatusTypeDef USBD_CtlContinueSendData(USBD_HandleTypeDef *pdev,
uint8_t *pbuf,
uint16_t len);
USBD_StatusTypeDef USBD_CtlPrepareRx(USBD_HandleTypeDef *pdev,
uint8_t *pbuf,
uint16_t len);
USBD_StatusTypeDef USBD_CtlContinueRx(USBD_HandleTypeDef *pdev,
uint8_t *pbuf,
uint16_t len);
USBD_StatusTypeDef USBD_CtlSendStatus(USBD_HandleTypeDef *pdev);
USBD_StatusTypeDef USBD_CtlReceiveStatus(USBD_HandleTypeDef *pdev);
uint32_t USBD_GetRxCount(USBD_HandleTypeDef *pdev, uint8_t ep_addr);
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* __USBD_IOREQ_H */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

611
Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.c Normal file
View File

@@ -0,0 +1,611 @@
/**
******************************************************************************
* @file usbd_core.c
* @author MCD Application Team
* @brief This file provides all the USBD core functions.
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2015 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under Ultimate Liberty license
* SLA0044, the "License"; You may not use this file except in compliance with
* the License. You may obtain a copy of the License at:
* www.st.com/SLA0044
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "usbd_core.h"
/** @addtogroup STM32_USBD_DEVICE_LIBRARY
* @{
*/
/** @defgroup USBD_CORE
* @brief usbd core module
* @{
*/
/** @defgroup USBD_CORE_Private_TypesDefinitions
* @{
*/
/**
* @}
*/
/** @defgroup USBD_CORE_Private_Defines
* @{
*/
/**
* @}
*/
/** @defgroup USBD_CORE_Private_Macros
* @{
*/
/**
* @}
*/
/** @defgroup USBD_CORE_Private_FunctionPrototypes
* @{
*/
/**
* @}
*/
/** @defgroup USBD_CORE_Private_Variables
* @{
*/
/**
* @}
*/
/** @defgroup USBD_CORE_Private_Functions
* @{
*/
/**
* @brief USBD_Init
* Initializes the device stack and load the class driver
* @param pdev: device instance
* @param pdesc: Descriptor structure address
* @param id: Low level core index
* @retval None
*/
USBD_StatusTypeDef USBD_Init(USBD_HandleTypeDef *pdev,
USBD_DescriptorsTypeDef *pdesc, uint8_t id)
{
/* Check whether the USB Host handle is valid */
if (pdev == NULL)
{
#if (USBD_DEBUG_LEVEL > 1U)
USBD_ErrLog("Invalid Device handle");
#endif
return USBD_FAIL;
}
/* Unlink previous class*/
if (pdev->pClass != NULL)
{
pdev->pClass = NULL;
}
/* Assign USBD Descriptors */
if (pdesc != NULL)
{
pdev->pDesc = pdesc;
}
/* Set Device initial State */
pdev->dev_state = USBD_STATE_DEFAULT;
pdev->id = id;
/* Initialize low level driver */
USBD_LL_Init(pdev);
return USBD_OK;
}
/**
* @brief USBD_DeInit
* Re-Initialize th device library
* @param pdev: device instance
* @retval status: status
*/
USBD_StatusTypeDef USBD_DeInit(USBD_HandleTypeDef *pdev)
{
/* Set Default State */
pdev->dev_state = USBD_STATE_DEFAULT;
/* Free Class Resources */
pdev->pClass->DeInit(pdev, (uint8_t)pdev->dev_config);
/* Stop the low level driver */
USBD_LL_Stop(pdev);
/* Initialize low level driver */
USBD_LL_DeInit(pdev);
return USBD_OK;
}
/**
* @brief USBD_RegisterClass
* Link class driver to Device Core.
* @param pDevice : Device Handle
* @param pclass: Class handle
* @retval USBD Status
*/
USBD_StatusTypeDef USBD_RegisterClass(USBD_HandleTypeDef *pdev, USBD_ClassTypeDef *pclass)
{
USBD_StatusTypeDef status = USBD_OK;
if (pclass != NULL)
{
/* link the class to the USB Device handle */
pdev->pClass = pclass;
status = USBD_OK;
}
else
{
#if (USBD_DEBUG_LEVEL > 1U)
USBD_ErrLog("Invalid Class handle");
#endif
status = USBD_FAIL;
}
return status;
}
/**
* @brief USBD_Start
* Start the USB Device Core.
* @param pdev: Device Handle
* @retval USBD Status
*/
USBD_StatusTypeDef USBD_Start(USBD_HandleTypeDef *pdev)
{
/* Start the low level driver */
USBD_LL_Start(pdev);
return USBD_OK;
}
/**
* @brief USBD_Stop
* Stop the USB Device Core.
* @param pdev: Device Handle
* @retval USBD Status
*/
USBD_StatusTypeDef USBD_Stop(USBD_HandleTypeDef *pdev)
{
/* Free Class Resources */
pdev->pClass->DeInit(pdev, (uint8_t)pdev->dev_config);
/* Stop the low level driver */
USBD_LL_Stop(pdev);
return USBD_OK;
}
/**
* @brief USBD_RunTestMode
* Launch test mode process
* @param pdev: device instance
* @retval status
*/
USBD_StatusTypeDef USBD_RunTestMode(USBD_HandleTypeDef *pdev)
{
/* Prevent unused argument compilation warning */
UNUSED(pdev);
return USBD_OK;
}
/**
* @brief USBD_SetClassConfig
* Configure device and start the interface
* @param pdev: device instance
* @param cfgidx: configuration index
* @retval status
*/
USBD_StatusTypeDef USBD_SetClassConfig(USBD_HandleTypeDef *pdev, uint8_t cfgidx)
{
USBD_StatusTypeDef ret = USBD_FAIL;
if (pdev->pClass != NULL)
{
/* Set configuration and Start the Class*/
if (pdev->pClass->Init(pdev, cfgidx) == 0U)
{
ret = USBD_OK;
}
}
return ret;
}
/**
* @brief USBD_ClrClassConfig
* Clear current configuration
* @param pdev: device instance
* @param cfgidx: configuration index
* @retval status: USBD_StatusTypeDef
*/
USBD_StatusTypeDef USBD_ClrClassConfig(USBD_HandleTypeDef *pdev, uint8_t cfgidx)
{
/* Clear configuration and De-initialize the Class process*/
pdev->pClass->DeInit(pdev, cfgidx);
return USBD_OK;
}
/**
* @brief USBD_SetupStage
* Handle the setup stage
* @param pdev: device instance
* @retval status
*/
USBD_StatusTypeDef USBD_LL_SetupStage(USBD_HandleTypeDef *pdev, uint8_t *psetup)
{
USBD_ParseSetupRequest(&pdev->request, psetup);
pdev->ep0_state = USBD_EP0_SETUP;
pdev->ep0_data_len = pdev->request.wLength;
switch (pdev->request.bmRequest & 0x1FU)
{
case USB_REQ_RECIPIENT_DEVICE:
USBD_StdDevReq(pdev, &pdev->request);
break;
case USB_REQ_RECIPIENT_INTERFACE:
USBD_StdItfReq(pdev, &pdev->request);
break;
case USB_REQ_RECIPIENT_ENDPOINT:
USBD_StdEPReq(pdev, &pdev->request);
break;
default:
USBD_LL_StallEP(pdev, (pdev->request.bmRequest & 0x80U));
break;
}
return USBD_OK;
}
/**
* @brief USBD_DataOutStage
* Handle data OUT stage
* @param pdev: device instance
* @param epnum: endpoint index
* @retval status
*/
USBD_StatusTypeDef USBD_LL_DataOutStage(USBD_HandleTypeDef *pdev,
uint8_t epnum, uint8_t *pdata)
{
USBD_EndpointTypeDef *pep;
if (epnum == 0U)
{
pep = &pdev->ep_out[0];
if (pdev->ep0_state == USBD_EP0_DATA_OUT)
{
if (pep->rem_length > pep->maxpacket)
{
pep->rem_length -= pep->maxpacket;
USBD_CtlContinueRx(pdev, pdata,
(uint16_t)MIN(pep->rem_length, pep->maxpacket));
}
else
{
if ((pdev->pClass->EP0_RxReady != NULL) &&
(pdev->dev_state == USBD_STATE_CONFIGURED))
{
pdev->pClass->EP0_RxReady(pdev);
}
USBD_CtlSendStatus(pdev);
}
}
else
{
if (pdev->ep0_state == USBD_EP0_STATUS_OUT)
{
/*
* STATUS PHASE completed, update ep0_state to idle
*/
pdev->ep0_state = USBD_EP0_IDLE;
USBD_LL_StallEP(pdev, 0U);
}
}
}
else if ((pdev->pClass->DataOut != NULL) &&
(pdev->dev_state == USBD_STATE_CONFIGURED))
{
pdev->pClass->DataOut(pdev, epnum);
}
else
{
/* should never be in this condition */
return USBD_FAIL;
}
return USBD_OK;
}
/**
* @brief USBD_DataInStage
* Handle data in stage
* @param pdev: device instance
* @param epnum: endpoint index
* @retval status
*/
USBD_StatusTypeDef USBD_LL_DataInStage(USBD_HandleTypeDef *pdev,
uint8_t epnum, uint8_t *pdata)
{
USBD_EndpointTypeDef *pep;
if (epnum == 0U)
{
pep = &pdev->ep_in[0];
if (pdev->ep0_state == USBD_EP0_DATA_IN)
{
if (pep->rem_length > pep->maxpacket)
{
pep->rem_length -= pep->maxpacket;
USBD_CtlContinueSendData(pdev, pdata, (uint16_t)pep->rem_length);
/* Prepare endpoint for premature end of transfer */
USBD_LL_PrepareReceive(pdev, 0U, NULL, 0U);
}
else
{
/* last packet is MPS multiple, so send ZLP packet */
if ((pep->total_length % pep->maxpacket == 0U) &&
(pep->total_length >= pep->maxpacket) &&
(pep->total_length < pdev->ep0_data_len))
{
USBD_CtlContinueSendData(pdev, NULL, 0U);
pdev->ep0_data_len = 0U;
/* Prepare endpoint for premature end of transfer */
USBD_LL_PrepareReceive(pdev, 0U, NULL, 0U);
}
else
{
if ((pdev->pClass->EP0_TxSent != NULL) &&
(pdev->dev_state == USBD_STATE_CONFIGURED))
{
pdev->pClass->EP0_TxSent(pdev);
}
USBD_LL_StallEP(pdev, 0x80U);
USBD_CtlReceiveStatus(pdev);
}
}
}
else
{
if ((pdev->ep0_state == USBD_EP0_STATUS_IN) ||
(pdev->ep0_state == USBD_EP0_IDLE))
{
USBD_LL_StallEP(pdev, 0x80U);
}
}
if (pdev->dev_test_mode == 1U)
{
USBD_RunTestMode(pdev);
pdev->dev_test_mode = 0U;
}
}
else if ((pdev->pClass->DataIn != NULL) &&
(pdev->dev_state == USBD_STATE_CONFIGURED))
{
pdev->pClass->DataIn(pdev, epnum);
}
else
{
/* should never be in this condition */
return USBD_FAIL;
}
return USBD_OK;
}
/**
* @brief USBD_LL_Reset
* Handle Reset event
* @param pdev: device instance
* @retval status
*/
USBD_StatusTypeDef USBD_LL_Reset(USBD_HandleTypeDef *pdev)
{
/* Open EP0 OUT */
USBD_LL_OpenEP(pdev, 0x00U, USBD_EP_TYPE_CTRL, USB_MAX_EP0_SIZE);
pdev->ep_out[0x00U & 0xFU].is_used = 1U;
pdev->ep_out[0].maxpacket = USB_MAX_EP0_SIZE;
/* Open EP0 IN */
USBD_LL_OpenEP(pdev, 0x80U, USBD_EP_TYPE_CTRL, USB_MAX_EP0_SIZE);
pdev->ep_in[0x80U & 0xFU].is_used = 1U;
pdev->ep_in[0].maxpacket = USB_MAX_EP0_SIZE;
/* Upon Reset call user call back */
pdev->dev_state = USBD_STATE_DEFAULT;
pdev->ep0_state = USBD_EP0_IDLE;
pdev->dev_config = 0U;
pdev->dev_remote_wakeup = 0U;
if (pdev->pClassData)
{
pdev->pClass->DeInit(pdev, (uint8_t)pdev->dev_config);
}
return USBD_OK;
}
/**
* @brief USBD_LL_Reset
* Handle Reset event
* @param pdev: device instance
* @retval status
*/
USBD_StatusTypeDef USBD_LL_SetSpeed(USBD_HandleTypeDef *pdev,
USBD_SpeedTypeDef speed)
{
pdev->dev_speed = speed;
return USBD_OK;
}
/**
* @brief USBD_Suspend
* Handle Suspend event
* @param pdev: device instance
* @retval status
*/
USBD_StatusTypeDef USBD_LL_Suspend(USBD_HandleTypeDef *pdev)
{
pdev->dev_old_state = pdev->dev_state;
pdev->dev_state = USBD_STATE_SUSPENDED;
return USBD_OK;
}
/**
* @brief USBD_Resume
* Handle Resume event
* @param pdev: device instance
* @retval status
*/
USBD_StatusTypeDef USBD_LL_Resume(USBD_HandleTypeDef *pdev)
{
if (pdev->dev_state == USBD_STATE_SUSPENDED)
{
pdev->dev_state = pdev->dev_old_state;
}
return USBD_OK;
}
/**
* @brief USBD_SOF
* Handle SOF event
* @param pdev: device instance
* @retval status
*/
USBD_StatusTypeDef USBD_LL_SOF(USBD_HandleTypeDef *pdev)
{
if (pdev->dev_state == USBD_STATE_CONFIGURED)
{
if (pdev->pClass->SOF != NULL)
{
pdev->pClass->SOF(pdev);
}
}
return USBD_OK;
}
/**
* @brief USBD_IsoINIncomplete
* Handle iso in incomplete event
* @param pdev: device instance
* @retval status
*/
USBD_StatusTypeDef USBD_LL_IsoINIncomplete(USBD_HandleTypeDef *pdev,
uint8_t epnum)
{
/* Prevent unused arguments compilation warning */
UNUSED(pdev);
UNUSED(epnum);
return USBD_OK;
}
/**
* @brief USBD_IsoOUTIncomplete
* Handle iso out incomplete event
* @param pdev: device instance
* @retval status
*/
USBD_StatusTypeDef USBD_LL_IsoOUTIncomplete(USBD_HandleTypeDef *pdev,
uint8_t epnum)
{
/* Prevent unused arguments compilation warning */
UNUSED(pdev);
UNUSED(epnum);
return USBD_OK;
}
/**
* @brief USBD_DevConnected
* Handle device connection event
* @param pdev: device instance
* @retval status
*/
USBD_StatusTypeDef USBD_LL_DevConnected(USBD_HandleTypeDef *pdev)
{
/* Prevent unused argument compilation warning */
UNUSED(pdev);
return USBD_OK;
}
/**
* @brief USBD_DevDisconnected
* Handle device disconnection event
* @param pdev: device instance
* @retval status
*/
USBD_StatusTypeDef USBD_LL_DevDisconnected(USBD_HandleTypeDef *pdev)
{
/* Free Class Resources */
pdev->dev_state = USBD_STATE_DEFAULT;
pdev->pClass->DeInit(pdev, (uint8_t)pdev->dev_config);
return USBD_OK;
}
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

918
Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.c Normal file
View File

@@ -0,0 +1,918 @@
/**
******************************************************************************
* @file usbd_req.c
* @author MCD Application Team
* @brief This file provides the standard USB requests following chapter 9.
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2015 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under Ultimate Liberty license
* SLA0044, the "License"; You may not use this file except in compliance with
* the License. You may obtain a copy of the License at:
* www.st.com/SLA0044
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "usbd_ctlreq.h"
#include "usbd_ioreq.h"
/** @addtogroup STM32_USBD_STATE_DEVICE_LIBRARY
* @{
*/
/** @defgroup USBD_REQ
* @brief USB standard requests module
* @{
*/
/** @defgroup USBD_REQ_Private_TypesDefinitions
* @{
*/
/**
* @}
*/
/** @defgroup USBD_REQ_Private_Defines
* @{
*/
/**
* @}
*/
/** @defgroup USBD_REQ_Private_Macros
* @{
*/
/**
* @}
*/
/** @defgroup USBD_REQ_Private_Variables
* @{
*/
/**
* @}
*/
/** @defgroup USBD_REQ_Private_FunctionPrototypes
* @{
*/
static void USBD_GetDescriptor(USBD_HandleTypeDef *pdev,
USBD_SetupReqTypedef *req);
static void USBD_SetAddress(USBD_HandleTypeDef *pdev,
USBD_SetupReqTypedef *req);
static void USBD_SetConfig(USBD_HandleTypeDef *pdev,
USBD_SetupReqTypedef *req);
static void USBD_GetConfig(USBD_HandleTypeDef *pdev,
USBD_SetupReqTypedef *req);
static void USBD_GetStatus(USBD_HandleTypeDef *pdev,
USBD_SetupReqTypedef *req);
static void USBD_SetFeature(USBD_HandleTypeDef *pdev,
USBD_SetupReqTypedef *req);
static void USBD_ClrFeature(USBD_HandleTypeDef *pdev,
USBD_SetupReqTypedef *req);
static uint8_t USBD_GetLen(uint8_t *buf);
/**
* @}
*/
/** @defgroup USBD_REQ_Private_Functions
* @{
*/
/**
* @brief USBD_StdDevReq
* Handle standard usb device requests
* @param pdev: device instance
* @param req: usb request
* @retval status
*/
USBD_StatusTypeDef USBD_StdDevReq(USBD_HandleTypeDef *pdev,
USBD_SetupReqTypedef *req)
{
USBD_StatusTypeDef ret = USBD_OK;
switch (req->bmRequest & USB_REQ_TYPE_MASK)
{
case USB_REQ_TYPE_CLASS:
case USB_REQ_TYPE_VENDOR:
pdev->pClass->Setup(pdev, req);
break;
case USB_REQ_TYPE_STANDARD:
switch (req->bRequest)
{
case USB_REQ_GET_DESCRIPTOR:
USBD_GetDescriptor(pdev, req);
break;
case USB_REQ_SET_ADDRESS:
USBD_SetAddress(pdev, req);
break;
case USB_REQ_SET_CONFIGURATION:
USBD_SetConfig(pdev, req);
break;
case USB_REQ_GET_CONFIGURATION:
USBD_GetConfig(pdev, req);
break;
case USB_REQ_GET_STATUS:
USBD_GetStatus(pdev, req);
break;
case USB_REQ_SET_FEATURE:
USBD_SetFeature(pdev, req);
break;
case USB_REQ_CLEAR_FEATURE:
USBD_ClrFeature(pdev, req);
break;
default:
USBD_CtlError(pdev, req);
break;
}
break;
default:
USBD_CtlError(pdev, req);
break;
}
return ret;
}
/**
* @brief USBD_StdItfReq
* Handle standard usb interface requests
* @param pdev: device instance
* @param req: usb request
* @retval status
*/
USBD_StatusTypeDef USBD_StdItfReq(USBD_HandleTypeDef *pdev,
USBD_SetupReqTypedef *req)
{
USBD_StatusTypeDef ret = USBD_OK;
switch (req->bmRequest & USB_REQ_TYPE_MASK)
{
case USB_REQ_TYPE_CLASS:
case USB_REQ_TYPE_VENDOR:
case USB_REQ_TYPE_STANDARD:
switch (pdev->dev_state)
{
case USBD_STATE_DEFAULT:
case USBD_STATE_ADDRESSED:
case USBD_STATE_CONFIGURED:
if (LOBYTE(req->wIndex) <= USBD_MAX_NUM_INTERFACES)
{
ret = (USBD_StatusTypeDef)pdev->pClass->Setup(pdev, req);
if ((req->wLength == 0U) && (ret == USBD_OK))
{
USBD_CtlSendStatus(pdev);
}
}
else
{
USBD_CtlError(pdev, req);
}
break;
default:
USBD_CtlError(pdev, req);
break;
}
break;
default:
USBD_CtlError(pdev, req);
break;
}
return USBD_OK;
}
/**
* @brief USBD_StdEPReq
* Handle standard usb endpoint requests
* @param pdev: device instance
* @param req: usb request
* @retval status
*/
USBD_StatusTypeDef USBD_StdEPReq(USBD_HandleTypeDef *pdev,
USBD_SetupReqTypedef *req)
{
USBD_EndpointTypeDef *pep;
uint8_t ep_addr;
USBD_StatusTypeDef ret = USBD_OK;
ep_addr = LOBYTE(req->wIndex);
switch (req->bmRequest & USB_REQ_TYPE_MASK)
{
case USB_REQ_TYPE_CLASS:
case USB_REQ_TYPE_VENDOR:
pdev->pClass->Setup(pdev, req);
break;
case USB_REQ_TYPE_STANDARD:
/* Check if it is a class request */
if ((req->bmRequest & 0x60U) == 0x20U)
{
ret = (USBD_StatusTypeDef)pdev->pClass->Setup(pdev, req);
return ret;
}
switch (req->bRequest)
{
case USB_REQ_SET_FEATURE:
switch (pdev->dev_state)
{
case USBD_STATE_ADDRESSED:
if ((ep_addr != 0x00U) && (ep_addr != 0x80U))
{
USBD_LL_StallEP(pdev, ep_addr);
USBD_LL_StallEP(pdev, 0x80U);
}
else
{
USBD_CtlError(pdev, req);
}
break;
case USBD_STATE_CONFIGURED:
if (req->wValue == USB_FEATURE_EP_HALT)
{
if ((ep_addr != 0x00U) &&
(ep_addr != 0x80U) && (req->wLength == 0x00U))
{
USBD_LL_StallEP(pdev, ep_addr);
}
}
USBD_CtlSendStatus(pdev);
break;
default:
USBD_CtlError(pdev, req);
break;
}
break;
case USB_REQ_CLEAR_FEATURE:
switch (pdev->dev_state)
{
case USBD_STATE_ADDRESSED:
if ((ep_addr != 0x00U) && (ep_addr != 0x80U))
{
USBD_LL_StallEP(pdev, ep_addr);
USBD_LL_StallEP(pdev, 0x80U);
}
else
{
USBD_CtlError(pdev, req);
}
break;
case USBD_STATE_CONFIGURED:
if (req->wValue == USB_FEATURE_EP_HALT)
{
if ((ep_addr & 0x7FU) != 0x00U)
{
USBD_LL_ClearStallEP(pdev, ep_addr);
}
USBD_CtlSendStatus(pdev);
}
break;
default:
USBD_CtlError(pdev, req);
break;
}
break;
case USB_REQ_GET_STATUS:
switch (pdev->dev_state)
{
case USBD_STATE_ADDRESSED:
if ((ep_addr != 0x00U) && (ep_addr != 0x80U))
{
USBD_CtlError(pdev, req);
break;
}
pep = ((ep_addr & 0x80U) == 0x80U) ? &pdev->ep_in[ep_addr & 0x7FU] : \
&pdev->ep_out[ep_addr & 0x7FU];
pep->status = 0x0000U;
USBD_CtlSendData(pdev, (uint8_t *)(void *)&pep->status, 2U);
break;
case USBD_STATE_CONFIGURED:
if ((ep_addr & 0x80U) == 0x80U)
{
if (pdev->ep_in[ep_addr & 0xFU].is_used == 0U)
{
USBD_CtlError(pdev, req);
break;
}
}
else
{
if (pdev->ep_out[ep_addr & 0xFU].is_used == 0U)
{
USBD_CtlError(pdev, req);
break;
}
}
pep = ((ep_addr & 0x80U) == 0x80U) ? &pdev->ep_in[ep_addr & 0x7FU] : \
&pdev->ep_out[ep_addr & 0x7FU];
if ((ep_addr == 0x00U) || (ep_addr == 0x80U))
{
pep->status = 0x0000U;
}
else if (USBD_LL_IsStallEP(pdev, ep_addr))
{
pep->status = 0x0001U;
}
else
{
pep->status = 0x0000U;
}
USBD_CtlSendData(pdev, (uint8_t *)(void *)&pep->status, 2U);
break;
default:
USBD_CtlError(pdev, req);
break;
}
break;
default:
USBD_CtlError(pdev, req);
break;
}
break;
default:
USBD_CtlError(pdev, req);
break;
}
return ret;
}
/**
* @brief USBD_GetDescriptor
* Handle Get Descriptor requests
* @param pdev: device instance
* @param req: usb request
* @retval status
*/
static void USBD_GetDescriptor(USBD_HandleTypeDef *pdev,
USBD_SetupReqTypedef *req)
{
uint16_t len = 0U;
uint8_t *pbuf = NULL;
uint8_t err = 0U;
switch (req->wValue >> 8)
{
#if (USBD_LPM_ENABLED == 1U)
case USB_DESC_TYPE_BOS:
if (pdev->pDesc->GetBOSDescriptor != NULL)
{
pbuf = pdev->pDesc->GetBOSDescriptor(pdev->dev_speed, &len);
}
else
{
USBD_CtlError(pdev, req);
err++;
}
break;
#endif
case USB_DESC_TYPE_DEVICE:
pbuf = pdev->pDesc->GetDeviceDescriptor(pdev->dev_speed, &len);
break;
case USB_DESC_TYPE_CONFIGURATION:
if (pdev->dev_speed == USBD_SPEED_HIGH)
{
pbuf = pdev->pClass->GetHSConfigDescriptor(&len);
pbuf[1] = USB_DESC_TYPE_CONFIGURATION;
}
else
{
pbuf = pdev->pClass->GetFSConfigDescriptor(&len);
pbuf[1] = USB_DESC_TYPE_CONFIGURATION;
}
break;
case USB_DESC_TYPE_STRING:
switch ((uint8_t)(req->wValue))
{
case USBD_IDX_LANGID_STR:
if (pdev->pDesc->GetLangIDStrDescriptor != NULL)
{
pbuf = pdev->pDesc->GetLangIDStrDescriptor(pdev->dev_speed, &len);
}
else
{
USBD_CtlError(pdev, req);
err++;
}
break;
case USBD_IDX_MFC_STR:
if (pdev->pDesc->GetManufacturerStrDescriptor != NULL)
{
pbuf = pdev->pDesc->GetManufacturerStrDescriptor(pdev->dev_speed, &len);
}
else
{
USBD_CtlError(pdev, req);
err++;
}
break;
case USBD_IDX_PRODUCT_STR:
if (pdev->pDesc->GetProductStrDescriptor != NULL)
{
pbuf = pdev->pDesc->GetProductStrDescriptor(pdev->dev_speed, &len);
}
else
{
USBD_CtlError(pdev, req);
err++;
}
break;
case USBD_IDX_SERIAL_STR:
if (pdev->pDesc->GetSerialStrDescriptor != NULL)
{
pbuf = pdev->pDesc->GetSerialStrDescriptor(pdev->dev_speed, &len);
}
else
{
USBD_CtlError(pdev, req);
err++;
}
break;
case USBD_IDX_CONFIG_STR:
if (pdev->pDesc->GetConfigurationStrDescriptor != NULL)
{
pbuf = pdev->pDesc->GetConfigurationStrDescriptor(pdev->dev_speed, &len);
}
else
{
USBD_CtlError(pdev, req);
err++;
}
break;
case USBD_IDX_INTERFACE_STR:
if (pdev->pDesc->GetInterfaceStrDescriptor != NULL)
{
pbuf = pdev->pDesc->GetInterfaceStrDescriptor(pdev->dev_speed, &len);
}
else
{
USBD_CtlError(pdev, req);
err++;
}
break;
default:
#if (USBD_SUPPORT_USER_STRING_DESC == 1U)
if (pdev->pClass->GetUsrStrDescriptor != NULL)
{
pbuf = pdev->pClass->GetUsrStrDescriptor(pdev, (req->wValue), &len);
}
else
{
USBD_CtlError(pdev, req);
err++;
}
break;
#else
USBD_CtlError(pdev, req);
err++;
#endif
}
break;
case USB_DESC_TYPE_DEVICE_QUALIFIER:
if (pdev->dev_speed == USBD_SPEED_HIGH)
{
pbuf = pdev->pClass->GetDeviceQualifierDescriptor(&len);
}
else
{
USBD_CtlError(pdev, req);
err++;
}
break;
case USB_DESC_TYPE_OTHER_SPEED_CONFIGURATION:
if (pdev->dev_speed == USBD_SPEED_HIGH)
{
pbuf = pdev->pClass->GetOtherSpeedConfigDescriptor(&len);
pbuf[1] = USB_DESC_TYPE_OTHER_SPEED_CONFIGURATION;
}
else
{
USBD_CtlError(pdev, req);
err++;
}
break;
default:
USBD_CtlError(pdev, req);
err++;
break;
}
if (err != 0U)
{
return;
}
else
{
if ((len != 0U) && (req->wLength != 0U))
{
len = MIN(len, req->wLength);
(void)USBD_CtlSendData(pdev, pbuf, len);
}
if (req->wLength == 0U)
{
(void)USBD_CtlSendStatus(pdev);
}
}
}
/**
* @brief USBD_SetAddress
* Set device address
* @param pdev: device instance
* @param req: usb request
* @retval status
*/
static void USBD_SetAddress(USBD_HandleTypeDef *pdev,
USBD_SetupReqTypedef *req)
{
uint8_t dev_addr;
if ((req->wIndex == 0U) && (req->wLength == 0U) && (req->wValue < 128U))
{
dev_addr = (uint8_t)(req->wValue) & 0x7FU;
if (pdev->dev_state == USBD_STATE_CONFIGURED)
{
USBD_CtlError(pdev, req);
}
else
{
pdev->dev_address = dev_addr;
USBD_LL_SetUSBAddress(pdev, dev_addr);
USBD_CtlSendStatus(pdev);
if (dev_addr != 0U)
{
pdev->dev_state = USBD_STATE_ADDRESSED;
}
else
{
pdev->dev_state = USBD_STATE_DEFAULT;
}
}
}
else
{
USBD_CtlError(pdev, req);
}
}
/**
* @brief USBD_SetConfig
* Handle Set device configuration request
* @param pdev: device instance
* @param req: usb request
* @retval status
*/
static void USBD_SetConfig(USBD_HandleTypeDef *pdev, USBD_SetupReqTypedef *req)
{
static uint8_t cfgidx;
cfgidx = (uint8_t)(req->wValue);
if (cfgidx > USBD_MAX_NUM_CONFIGURATION)
{
USBD_CtlError(pdev, req);
}
else
{
switch (pdev->dev_state)
{
case USBD_STATE_ADDRESSED:
if (cfgidx)
{
pdev->dev_config = cfgidx;
pdev->dev_state = USBD_STATE_CONFIGURED;
if (USBD_SetClassConfig(pdev, cfgidx) == USBD_FAIL)
{
USBD_CtlError(pdev, req);
return;
}
USBD_CtlSendStatus(pdev);
}
else
{
USBD_CtlSendStatus(pdev);
}
break;
case USBD_STATE_CONFIGURED:
if (cfgidx == 0U)
{
pdev->dev_state = USBD_STATE_ADDRESSED;
pdev->dev_config = cfgidx;
USBD_ClrClassConfig(pdev, cfgidx);
USBD_CtlSendStatus(pdev);
}
else if (cfgidx != pdev->dev_config)
{
/* Clear old configuration */
USBD_ClrClassConfig(pdev, (uint8_t)pdev->dev_config);
/* set new configuration */
pdev->dev_config = cfgidx;
if (USBD_SetClassConfig(pdev, cfgidx) == USBD_FAIL)
{
USBD_CtlError(pdev, req);
return;
}
USBD_CtlSendStatus(pdev);
}
else
{
USBD_CtlSendStatus(pdev);
}
break;
default:
USBD_CtlError(pdev, req);
USBD_ClrClassConfig(pdev, cfgidx);
break;
}
}
}
/**
* @brief USBD_GetConfig
* Handle Get device configuration request
* @param pdev: device instance
* @param req: usb request
* @retval status
*/
static void USBD_GetConfig(USBD_HandleTypeDef *pdev, USBD_SetupReqTypedef *req)
{
if (req->wLength != 1U)
{
USBD_CtlError(pdev, req);
}
else
{
switch (pdev->dev_state)
{
case USBD_STATE_DEFAULT:
case USBD_STATE_ADDRESSED:
pdev->dev_default_config = 0U;
USBD_CtlSendData(pdev, (uint8_t *)(void *)&pdev->dev_default_config, 1U);
break;
case USBD_STATE_CONFIGURED:
USBD_CtlSendData(pdev, (uint8_t *)(void *)&pdev->dev_config, 1U);
break;
default:
USBD_CtlError(pdev, req);
break;
}
}
}
/**
* @brief USBD_GetStatus
* Handle Get Status request
* @param pdev: device instance
* @param req: usb request
* @retval status
*/
static void USBD_GetStatus(USBD_HandleTypeDef *pdev, USBD_SetupReqTypedef *req)
{
switch (pdev->dev_state)
{
case USBD_STATE_DEFAULT:
case USBD_STATE_ADDRESSED:
case USBD_STATE_CONFIGURED:
if (req->wLength != 0x2U)
{
USBD_CtlError(pdev, req);
break;
}
#if (USBD_SELF_POWERED == 1U)
pdev->dev_config_status = USB_CONFIG_SELF_POWERED;
#else
pdev->dev_config_status = 0U;
#endif
if (pdev->dev_remote_wakeup)
{
pdev->dev_config_status |= USB_CONFIG_REMOTE_WAKEUP;
}
USBD_CtlSendData(pdev, (uint8_t *)(void *)&pdev->dev_config_status, 2U);
break;
default:
USBD_CtlError(pdev, req);
break;
}
}
/**
* @brief USBD_SetFeature
* Handle Set device feature request
* @param pdev: device instance
* @param req: usb request
* @retval status
*/
static void USBD_SetFeature(USBD_HandleTypeDef *pdev,
USBD_SetupReqTypedef *req)
{
if (req->wValue == USB_FEATURE_REMOTE_WAKEUP)
{
pdev->dev_remote_wakeup = 1U;
USBD_CtlSendStatus(pdev);
}
}
/**
* @brief USBD_ClrFeature
* Handle clear device feature request
* @param pdev: device instance
* @param req: usb request
* @retval status
*/
static void USBD_ClrFeature(USBD_HandleTypeDef *pdev,
USBD_SetupReqTypedef *req)
{
switch (pdev->dev_state)
{
case USBD_STATE_DEFAULT:
case USBD_STATE_ADDRESSED:
case USBD_STATE_CONFIGURED:
if (req->wValue == USB_FEATURE_REMOTE_WAKEUP)
{
pdev->dev_remote_wakeup = 0U;
USBD_CtlSendStatus(pdev);
}
break;
default:
USBD_CtlError(pdev, req);
break;
}
}
/**
* @brief USBD_ParseSetupRequest
* Copy buffer into setup structure
* @param pdev: device instance
* @param req: usb request
* @retval None
*/
void USBD_ParseSetupRequest(USBD_SetupReqTypedef *req, uint8_t *pdata)
{
req->bmRequest = *(uint8_t *)(pdata);
req->bRequest = *(uint8_t *)(pdata + 1U);
req->wValue = SWAPBYTE(pdata + 2U);
req->wIndex = SWAPBYTE(pdata + 4U);
req->wLength = SWAPBYTE(pdata + 6U);
}
/**
* @brief USBD_CtlError
* Handle USB low level Error
* @param pdev: device instance
* @param req: usb request
* @retval None
*/
void USBD_CtlError(USBD_HandleTypeDef *pdev,
USBD_SetupReqTypedef *req)
{
USBD_LL_StallEP(pdev, 0x80U);
USBD_LL_StallEP(pdev, 0U);
}
/**
* @brief USBD_GetString
* Convert Ascii string into unicode one
* @param desc : descriptor buffer
* @param unicode : Formatted string buffer (unicode)
* @param len : descriptor length
* @retval None
*/
void USBD_GetString(uint8_t *desc, uint8_t *unicode, uint16_t *len)
{
uint8_t idx = 0U;
if (desc != NULL)
{
*len = (uint16_t)USBD_GetLen(desc) * 2U + 2U;
unicode[idx++] = *(uint8_t *)(void *)len;
unicode[idx++] = USB_DESC_TYPE_STRING;
while (*desc != '\0')
{
unicode[idx++] = *desc++;
unicode[idx++] = 0U;
}
}
}
/**
* @brief USBD_GetLen
* return the string length
* @param buf : pointer to the ascii string buffer
* @retval string length
*/
static uint8_t USBD_GetLen(uint8_t *buf)
{
uint8_t len = 0U;
while (*buf != '\0')
{
len++;
buf++;
}
return len;
}
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

216
Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.c Normal file
View File

@@ -0,0 +1,216 @@
/**
******************************************************************************
* @file usbd_ioreq.c
* @author MCD Application Team
* @brief This file provides the IO requests APIs for control endpoints.
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2015 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under Ultimate Liberty license
* SLA0044, the "License"; You may not use this file except in compliance with
* the License. You may obtain a copy of the License at:
* www.st.com/SLA0044
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "usbd_ioreq.h"
/** @addtogroup STM32_USB_DEVICE_LIBRARY
* @{
*/
/** @defgroup USBD_IOREQ
* @brief control I/O requests module
* @{
*/
/** @defgroup USBD_IOREQ_Private_TypesDefinitions
* @{
*/
/**
* @}
*/
/** @defgroup USBD_IOREQ_Private_Defines
* @{
*/
/**
* @}
*/
/** @defgroup USBD_IOREQ_Private_Macros
* @{
*/
/**
* @}
*/
/** @defgroup USBD_IOREQ_Private_Variables
* @{
*/
/**
* @}
*/
/** @defgroup USBD_IOREQ_Private_FunctionPrototypes
* @{
*/
/**
* @}
*/
/** @defgroup USBD_IOREQ_Private_Functions
* @{
*/
/**
* @brief USBD_CtlSendData
* send data on the ctl pipe
* @param pdev: device instance
* @param buff: pointer to data buffer
* @param len: length of data to be sent
* @retval status
*/
USBD_StatusTypeDef USBD_CtlSendData(USBD_HandleTypeDef *pdev,
uint8_t *pbuf, uint16_t len)
{
/* Set EP0 State */
pdev->ep0_state = USBD_EP0_DATA_IN;
pdev->ep_in[0].total_length = len;
pdev->ep_in[0].rem_length = len;
/* Start the transfer */
USBD_LL_Transmit(pdev, 0x00U, pbuf, len);
return USBD_OK;
}
/**
* @brief USBD_CtlContinueSendData
* continue sending data on the ctl pipe
* @param pdev: device instance
* @param buff: pointer to data buffer
* @param len: length of data to be sent
* @retval status
*/
USBD_StatusTypeDef USBD_CtlContinueSendData(USBD_HandleTypeDef *pdev,
uint8_t *pbuf, uint16_t len)
{
/* Start the next transfer */
USBD_LL_Transmit(pdev, 0x00U, pbuf, len);
return USBD_OK;
}
/**
* @brief USBD_CtlPrepareRx
* receive data on the ctl pipe
* @param pdev: device instance
* @param buff: pointer to data buffer
* @param len: length of data to be received
* @retval status
*/
USBD_StatusTypeDef USBD_CtlPrepareRx(USBD_HandleTypeDef *pdev,
uint8_t *pbuf, uint16_t len)
{
/* Set EP0 State */
pdev->ep0_state = USBD_EP0_DATA_OUT;
pdev->ep_out[0].total_length = len;
pdev->ep_out[0].rem_length = len;
/* Start the transfer */
USBD_LL_PrepareReceive(pdev, 0U, pbuf, len);
return USBD_OK;
}
/**
* @brief USBD_CtlContinueRx
* continue receive data on the ctl pipe
* @param pdev: device instance
* @param buff: pointer to data buffer
* @param len: length of data to be received
* @retval status
*/
USBD_StatusTypeDef USBD_CtlContinueRx(USBD_HandleTypeDef *pdev,
uint8_t *pbuf, uint16_t len)
{
USBD_LL_PrepareReceive(pdev, 0U, pbuf, len);
return USBD_OK;
}
/**
* @brief USBD_CtlSendStatus
* send zero lzngth packet on the ctl pipe
* @param pdev: device instance
* @retval status
*/
USBD_StatusTypeDef USBD_CtlSendStatus(USBD_HandleTypeDef *pdev)
{
/* Set EP0 State */
pdev->ep0_state = USBD_EP0_STATUS_IN;
/* Start the transfer */
USBD_LL_Transmit(pdev, 0x00U, NULL, 0U);
return USBD_OK;
}
/**
* @brief USBD_CtlReceiveStatus
* receive zero lzngth packet on the ctl pipe
* @param pdev: device instance
* @retval status
*/
USBD_StatusTypeDef USBD_CtlReceiveStatus(USBD_HandleTypeDef *pdev)
{
/* Set EP0 State */
pdev->ep0_state = USBD_EP0_STATUS_OUT;
/* Start the transfer */
USBD_LL_PrepareReceive(pdev, 0U, NULL, 0U);
return USBD_OK;
}
/**
* @brief USBD_GetRxCount
* returns the received data length
* @param pdev: device instance
* @param ep_addr: endpoint address
* @retval Rx Data blength
*/
uint32_t USBD_GetRxCount(USBD_HandleTypeDef *pdev, uint8_t ep_addr)
{
return USBD_LL_GetRxDataSize(pdev, ep_addr);
}
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/